Domo DO9150W Manual download pdf (Page 23)

DO9150W

www.domo-elektro.be

1. Tare

2. 0-indication

3. Symbol: weight, water and milk

4. Minus indication

5. Indication weight (g or lb:oz)

6. Indication volume (ml or ’oz)

PLACING THE BATTERIES

Open the lid of the battery compartment at the bottom of your scale.

Place 2 x 1.5V AAA batteries in the compartment, with the plus side at the + sign.

First place the at side of the battery against the spring and then push the other side

down.

WEIGHING

1. Place the scale on a stable and at surface.

2. Press the on/off button, to turn on the scale.

3. Make sure that the scale is set to weight mode, not volume mode. If this is not the

case, press the MODE button until the weighing symbol is displayed.

4. Place the item on the weighing platform. You can now read the weight from the

display.

5. If nothing is being weighed for 2 minutes, or if there is no other activity during

this period, the scale will automatically switch off. You can also switch off the

scale by pressing the on/off button.

ZERO OR TARE (T) FUNCTION

You can weigh different items consecutively without removing any items from the

scale.

1. Place the rst item onto the weighing platform and read the weight.

2. Press the ZERO button, so that the display indicates «0». The scale could also

rst display «----», followed by «0».

3. Now place the next item onto the weighing platform to read the weight of this

item.

4. If at this point you press the ZERO button again, the scale will display the total

weight of all ingredients on the scale.

Wegen Volume Wasser Volume Milch

ZERO

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

No comments

Domo DO9150W Manual Page 23